Park's Screw-Type Chain Tool is the ideal shop tool for easy and reliable chain maintenance and repair. The sliding shelf makes it compatible with 1/8th-inch chains and all 3/32nd-inch chains, from 5- to 11-speed. It's made from investment-cast tool steel and has long vinyl-coated handles and fine threading for easy chain pin removal. It also includes a stiff-link loosener and comes with an extra pin.
For Shimano and Truvativ cranks. Use with a 6mm hex key.
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.
$3.99 - $99.99
Stiff and strong tire levers. Compact and lightweight.
• Updated with a new material and new design • Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed • Perfect for tight beads and tubeless tires • Sold in sets of two.
1/2" Dr. bit socket H10 for Campagnolo® B.B. 10mm bolt
Double-ended to fit most slotted-type nuts, the other side is the tool to remove the dust cap out of the cranks, using a hex key you can easily install/remove the chaining bolts.
- Forged 8 groove spoke wrench - For spoke tension adjustment on 10G-15G nipples
$5.99 - $11.99
Torx Wrench sizes: #1: Torx T25, T30, T40 #2: Torx T10, T25, T30 TB-2638: Torx T25, T30, T40
$5.99 - $6.99
TB-1901: 3mm x 0.5, for rear wheel drop-out alignment screws TB-1902: 5mm x 0.8, for water bottle, toe clip, fender and rack bosses TB-1903: 6mm x 1.0, for cantilever brakes and large fender bosses TB-1904: 10mm x 1.0, for derailleur hanger
$5.99 - $9.99
TB-1085: Removes Shimano® MF freewheels. Use with 21mm wrench or 1/2” Drive ratchet wrench. TB-1045: Removes Shimano® MF freewheels . Use with an adjustable” or 24 mm wrench. Available to work with TB-FW10 or TB –FW20 while disassembling. TB-1045 can be turned with TB-8830.
Hub cone wrenches available in various sizes
- High grade steel screwdriver - Ergonomically-designed grip
Various spoke wrenches for differing spoke sizes and companies.
3 specially designed tire levers to install, remove and clean up tubular tire setups. Black lever shaped to help remove glue from rim. Orange levers shaped to help with safe removal and installation of tires.
TB-1709 is a tapered brush for clean those hard to reach places such as frame and tire.
Removes SunTour® 2-notch freewheels. Not recommended for SunTour® four to six notch freewheels. Use with 23mm wrench. TB-1035 can be turned with TB-8830.
Heat treated and made to last. For 3.2, 3.3, and 3.5mm nipples.
• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers
$6.99 - $31.00
Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.
$6.99 - $47.99
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
For 3.2, 3.3, 3.5, and 4.0mm nipples.
Our folding brush has a special design that includes a large handle with a curved tooth-end that allows scratching off the dirt between the cogs, nylon bristles brush cleans the chains. Patented design to fold away for easy storage.
Recommended by RockShox for shock rebuilds. • Rear shock seals lubricant • 2g tube
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
$7.49 - $7.99
Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.
Park's Shop Screwdrivers are pro-quality tools featuring durable and precise heat-treated chrome-vanadium tips and shafts and dual-density handles for an excellent grip.
Page 1 of 21 Next page